NYTT PÅ LAGER . INMP441 Omnidirectional Microphone I2S Interface for ESP32
search
  • NYTT PÅ LAGER . INMP441 Omnidirectional Microphone I2S Interface for ESP32
  • NYTT PÅ LAGER . INMP441 Omnidirectional Microphone I2S Interface for ESP32
  • NYTT PÅ LAGER . INMP441 Omnidirectional Microphone I2S Interface for ESP32
  • NYTT PÅ LAGER . INMP441 Omnidirectional Microphone I2S Interface for ESP32

NYTT PÅ LAGER . INMP441 Omnidirectional Microphone I2S Interface for ESP32

kr79.00
Tax included
Quantity

Denna kan finnas på lager och kan gå att köpa.
Har den ett positivt lagersaldo så finns den på lager.
Anledningen till att den ligger i kategori NYTT PÅ LAGER är att
den inte är beskriven eller att den inte är testad ännu.

I2S (Inter-IC Sound),

INMP441 Omnidirectional Microphone Module with I2S Interface for ESP32

The INMP441 is a high performance, low power, digital output, omnidirectional MEMS microphone with bottom port. The
The complete INMP441 solution consists of a MEMS sensor, signal conditioning, analog to digital converter, anti-aliasing filter, power management and industry standard 24-bit I2S interface. The I2S interface allows the INMP441 to be directly connected to digital processors such as DSPs and microcontrollers without the need for an audio codec for use in the system. The INMP441 has a high signal-to-noise ratio and is an excellent choice for near field applications. The INMP441 has a flat wideband frequency response that results in high definition of natural sound.

Product Features:
1. Digital I2S interface with high precision 24-bit data
2. High sensitivity - 26 dBFS
3. Stable frequency response from 60 Hz to 15 kHz
4. High signal to noise ratio is 61 dBA
5. Low power consumption: low current consumption 1.4 mA
6. High PSR: -75 dBFS
Interface definition:SCK: Serial data clock for I2S interface
WS: Serial data word selection for I2S interface
L/R: Left/Right channel selection.
When set to low, the microphone outputs a signal on the left channel of the I2S frame.
When set to high level, the microphone outputs signals on the right channel
SD: Serial data output of the I2S interface.
VCC: Input power, 1.8V to 3.3V.
GND: power ground
This product provides tutorials for using ESP32 modules with I2S functionality.Connect to ESP32:
INMP441 ESP32
SCK >> GPIO14
SD >> GPIO32
WS >> GPIO15
L/R >> GND
GND >> GND
VDD >> VDD3.3

Ingår.
1 st. modul.

Annat som kan passa dig.

Vikt: cirka 4gram.
Kontakta oss vid frågor, på info@pchbutik.se
Artikel nr: 1932


1932
3 Items
New
Comments (0)
No customer reviews for the moment.